Filtration Configurations
How we build the filtration train for five common duties — the cartridge combination, the standard sizes, and the trigger that tells you when to change out. These are reference configurations, not customer projects.
How we build the filtration train for five common duties — the cartridge combination, the standard sizes, and the trigger that tells you when to change out. These are reference configurations, not customer projects.
Reference configurations for the five duties we are asked about most. These are standard product trains with the engineering rationale behind them — not customer case studies.
Feed: municipal or borehole water
Pre-treatment ahead of the RO stage. The job is to protect the membrane, not to polish the water: sediment and chlorine have to come out before the RO, or the elements foul and the cleaning interval collapses.
Feed: river, reservoir or canal water
Surface water turbidity moves with the weather, so the filtration train has to absorb spikes rather than run at one fixed condition. Wound cartridges with graded density are usually the first stage for this duty.
Feed: municipal water with residual chlorine
Chlorine removal and sediment control on the water that touches product. Carbon block does the chlorine work; the PP stage in front of it keeps carbon fines out of the line.
Feed: RO permeate feeding a polished loop
Membrane and post-filtration elements for purified water production. Membrane performance depends on what the pre-treatment hands it, so the element is one part of a validated system rather than a system on its own.
Feed: brackish groundwater, typically 2,000–6,000 ppm TDS
Brackish feed is easier on the membrane than seawater but harder on the pre-treatment, because borehole water carries iron, silica and hardness that seawater plants do not always see.
Every project is unique. Contact our team to discuss your specific requirements and get a tailored solution.
Contact Us View ProductsCase studies are usually written as success stories. These are written as problems, because the problem is the part that transfers to your plant. Every application below comes with a failure mode — short cartridge life, inconsistent turbidity, a filter that passed a specification but not a real duty — and the fix was as much about the filtration train as about the cartridge itself.
| Application | The problem | What actually fixed it |
|---|---|---|
| Bottled water pre-filtration | Cartridges blinding in days, not weeks | Coarser pre-filter ahead of the fine stage; the fine cartridge was doing work the pre-filter should have done |
| Surface water treatment | Turbidity spikes after rain passing through | Wound cartridges with graded density, plus a change-out trigger based on differential pressure rather than calendar |
| Food processing water | Inconsistent quality between shifts | Single-source cartridges with a fixed micron rating instead of mixed stock |
| Pharmaceutical purification | Documentation gaps at audit | Material declaration and resin grade supplied per batch |
| Brackish water desalination pilot | RO membranes fouling faster than projected | 5-micron absolute cartridge immediately ahead of the membrane, not a nominal 10 |
| Industrial HVAC make-up | Cost per cubic metre too high | Wound cartridges instead of pleated — cheaper per volume on that duty |
A trial is only useful if you measure something. Before sending samples we ask three questions: what is the incoming water, what is the target, and what is the cartridge doing now. With those, the trial has a baseline and a result.
The measurement that matters most is differential pressure across the cartridge over time, not the calendar. A cartridge changed on a fixed schedule is either changed too early, wasting money, or too late, risking a breakthrough. Recording pressure drop at the start and end of each cartridge's life turns a guess into a plan.
Yes, in most cases. Send the part number, or a photograph of the cartridge and the housing, and we will identify the equivalent configuration and micron rating.
We supply the specification and the material declaration. Performance on your water is what your own trial measures — that is why we send samples rather than charts.
Sample quantities are free, with freight at cost. The first commercial order is 100 pieces per model.
Yes. Send the water analysis, the flow rate and what sits downstream — reverse osmosis, UV, filling line — and we will propose a filtration train rather than a single cartridge.