See the honest price range for your model, then send the specification for a written quotation
These ranges match the figures published on each product page. Your exact unit price depends on length, micron rating, end cap and quantity — the form below is how you get it.
FOB China, before volume discount. Freight and destination charges are quoted separately.
A range is not a price. Fill this in and our engineers reply with a firm unit price, the MOQ for your exact configuration, and a lead time — usually within one working day.
Two suppliers quoting "20 inch 5 micron PP" can be 60% apart. These are the variables that cause it, in the order they move the number.
| Variable | Why it matters | Typical effect |
|---|---|---|
| Length | Media area scales with length, and so does the raw material | 10" to 40" is roughly 1× to 3.5× |
| Micron rating | Finer ratings need tighter fibre control and lower line speed | +10% to +25% at 1 µm vs 20 µm |
| Media and construction | PES and PTFE membrane is a different cost class from melt-blown PP | PTFE can be 5–10× PP |
| Quantity | Setup cost is amortised; volume discounts start around 5,000 pcs | 5–15% at volume |
| End cap and O-ring | SOE-222/226 and special elastomer seals add parts and handling | +3% to +10% |
| Packaging and private label | Printed cartons, labels and instruction sheets are made in-house but still cost | +5% to +15% |
| Compliance documentation | FDA 21 CFR 177.1520 paperwork for the drinking-water grades (no NSF/ANSI listing held) | quoted per order, ask early |
Most buyers who come to us have already been burned once: the cartridges looked right, arrived on time, and clogged in a week because the micron rating was nominal rather than absolute, or because the water needed a pleated element instead of a melt-blown one.
| Product | Specification | Indicative unit price | MOQ | Production |
|---|---|---|---|---|
| PP Melt Blown Cartridge | 1–100 µm, 10"–40" | $0.50 – $3.00 | 100 pcs | 15–20 days |
| Wound String Cartridge | 1–100 µm, 10"–40" | $1.00 – $5.00 | 100 pcs | 15–20 days |
| Carbon Block Cartridge | 0.5–10 µm, 10"–20" | $2.00 – $8.00 | 100 pcs | 20–25 days |
| PES Membrane Cartridge | 0.22 / 0.45 µm | $5.00 – $20.00 | 100 pcs | 20–30 days |
| PTFE Cartridge | 0.22 µm hydrophobic | $8.00 – $30.00 | 100 pcs | 25–35 days |
| RO Membrane 4040 | BW / SWRO, 4 inch | $80.00 – $180.00 | 10 pcs | 15–20 days |
| RO Membrane 8040 | 8 inch, industrial | $280.00 – $650.00 | 10 pcs | 15–20 days |
| Big Blue Filter Housing | 10" / 20", 1" NPT | $15.00 – $80.00 | 10 pcs | 20–30 days |
MOQ: 100 pieces per model for cartridges, 10 pieces for RO elements and housings — you can mix models in one shipment. Payment: T/T standard, Western Union for small trials, L/C for larger shipments; USD or RMB. Shipping: 20–35 days by sea depending on port. Certifications: ISO 9001 production, CE marked, FDA 21 CFR 177.1520 compliance documentation on request, no NSF/ANSI 42/53 listing held for drinking-water grades.
We print a pre-production sample and wait for your written approval before the line starts. That one extra step is why our private-label orders rarely arrive with the wrong label.
100 pieces per model for cartridges, and 10 pieces for RO membrane elements and housings. You can mix several models in one shipment as long as each model meets its own minimum. For a trial order below MOQ we can usually still help — say so in the form and we will quote it as a sample order rather than telling you no.
Yes. We send free samples of standard cartridge models; you pay the courier. Send us the micron rating, length and end cap you need, and we ship within 3–5 working days. Test it on your own water, then decide — that is a cheaper way to find out than reading a datasheet.
Because the same cartridge in three lengths and two micron ratings is three different products. The range covers the smallest and largest standard configuration for that model, before any volume discount. Your exact price depends on length, micron, end cap, packaging and quantity, and we send it in writing within one working day.
Production is ISO 9001 certified and CE marked. Materials used in drinking-water products are FDA 21 CFR 177.1520 compliant, with the compliance documentation supplied on request; no NSF/ANSI 42 or 53 listing is held for the drinking-water grades. If your tender requires a certification letter or listing number, tell us the standard and we will confirm in writing what we can and cannot provide before you order.
T/T is standard, Western Union for small trial orders, and L/C for larger shipments. We normally ask for a deposit to start production with the balance before shipment. Payment can be made in USD or RMB.
Production is 15–20 days for PP and wound cartridges, 20–25 days for carbon block, 20–30 days for PES and housings, and 25–35 days for PTFE. Sea freight then takes roughly 20–35 days depending on the destination port, so plan on six to eight weeks door to door for a first order.
Yes — private label is routine. Send your logo artwork, the Pantone colours, the label size and the carton specification, and we will produce a printed sample for approval before the full run. OEM cartons, labels and instruction sheets are all made in-house, so there is no third-party minimum on top of ours.
Usually, yes. Send one photo of the cartridge and one of the label, plus the length, outer diameter and end cap configuration, and our engineers will identify the equivalent. If it is a non-standard size we can tool for it, but expect a longer lead time and a minimum quantity for the first run.
WhatsApp +86 137 3383 7935 · Email [email protected] · Zhengzhou, Henan, China
Back to the quote form